Shelters & Stores. Storage Design Limited

Chemstore - Drum & IBC Secure Stores

From £7,756.06 incl VAT

20 year structural guarantee
Base is manufactured from 3mm mild steel with RHS cross members & pressed ribs
Corner posts, shelf frames & main rails are rolled hollow section
The roof is pressed with suitable bracing & fully welded around the perimeter, while the back,
side & door panels are pressed from 2mm mild steel sheet & corrugated where required
Fitted with crane lifting points (maximum 2000kg per lift point) & sliding doors
The floor area above the sump is covered with galvanised steel channel sections so that
loose drums or pallets can be stored directly onto it, whilst the upper shelf is an open box section
which is designed to support pallets. Grid mesh shelving is available - please call for details
Shot blasted before being painted (RAL 6029) for greater durability
Other colours are available - please call for details
EDRIB9624 - push back system above the sump, allowing the units to be pushed to the back of the units

TRAFFIC LINE - Wall Mounted Bicycle Rack

£27.44 incl VAT

Swivels up to 180°
Compact and flexible design
Suitable for tyre width: 50mm
Manufactured in galvanised steel with round tube wheel locators

TRAFFIC LINE - Bicycle Racks

From £66.50 incl VAT

Great value for money
Suitable for tyre width: 40mm
Fully assembled for immediate use
Manufactured in galvanised steel with round tube wheel locators

Hi-Hoop Cycle Rack

From £79.35 incl VAT

Strong hot dip galvanised steel construction
Suitable for tyre width: 55mm
Accessible from both sides

Sheffield Style Racks

From £86.89 incl VAT

Economic, durable & effective bike storage
Manufactured in mild steel galvanised
48mm dia. x 2.5mm gauge steel tube
Size (above ground): 750W x 850H mm
Surface fixing plates: 70 x 160 x 5 mm

Lo-Hoop Cycle Rack

From £83.31 incl VAT

Strong hot dip galvanised steel construction
Suitable for tyre width: 55mm
Accessible from both sides

Traditional Racks

From £367.55 incl VAT

Twin level bike racks for use with Traditional Shelters
Powder coated dark grey
Fully welded - no assembly required
Simply bolts to floor (fixings not supplied)

Cycle Shelter

£4,624.95 incl VAT

Can fit up to 7 Bikes
Constructed from heavy gauge steel framework of bolted components
Fitted with Triple Wall Polycarbonate roof and side panels to protect the bikes
Modern and Attractive Design
Promote a healthy lifestyle in the wokplace
Staggered Storage to Prevent the Handles from Clashing
Powder Coated Green
On Site Construction Available - Ask for Details
Supplied Knock Down
A Fork Lift will be needed to unload the panelled sections
Weight: 200kg

Traditional Cycle Shelters - Powder Coated

From £2,153.89 incl VAT

Powder coated sheet steel side & back panels
Adjustable feet for on - site positioning
Parabolts for surface mounting to concrete included. Must be bolted to 250mm thick concrete for stability
High capacity shelters can be created using runs of initial & extension shelters or double depth shelters
Shelter height: 2100mm
These Shelters combine with the Traditional Cycle Racks
Available in Light Grey, Blue or Green, please specify when ordering or call for details
Supplied Knock Down

Traditional Cycle Shelters - Galvanised

From £1,453.69 incl VAT

Galvanised sheet steel side & back panels
Adjustable feet for on - site positioning
Parabolts for surface mounting to concrete included. Must be bolted to 250mm thick concrete for stability
High capacity shelters can be created using runs of initial & extension shelters or double depth shelters
Shelter height: 2100mm
These Shelters combine with the Traditional Cycle Racks
Available in Light Grey, Blue or Green, please specify when ordering or call for details
Supplied Knock Down

Industrial Cycle Shelter

£4,107.92 incl VAT

Can fit up to 7 Bikes
Constructed from heavy gauge steel framework of bolted components
Galvanised side panels & PVC roof
Design features curved roof & drainage gutters
On - site construction available - Call for Details
N.B: A Fork Lift will be needed to unload the panelled sections
Weight: 285kg

Economy Smoking Shelter

£1,405.09 incl VAT

No fixing required - Simply secure this unit by using six 600 x 600mm paving slabs ( not supplied )
Fabricated from robust Heavy Duty Box Section
Complemented by Tri Wall fluted Plastic side panels & a Galvanised sheet steel roof
Can also be used as a Wheeled Bin Shelter

Economy Smoking Shelter with Steel Sides

£1,735.09 incl VAT

No fixing required - Simply secure this unit by using six 600 x 600mm paving slabs ( not supplied )
Fabricated from robust Heavy Duty Box Section
Complemented by punched steel sides & back panel & a Galvanised sheet steel roof
Can also be used as a Wheeled Bin Shelter

Premier Smoking Shelters

From £5,107.08 incl VAT

Adjustable feet for on-site positioning
More than 50% open area to allow rapid dispersal of fumes
Parabolts for surface mounting to 250mm thick concrete for stability
Available in Light Grey, Blue or Green, please specify when ordering or call for details
Blue Premier Shelters are supplied with light blue perforated panels
Green and light grey Premier Shelters are supplied with light grey perforated panels

Smoking Shelter

£4,785.53 incl VAT

Polycarbonate panels provide high impact strength, 200 Times Stronger Than Glass
Fire resistant
On site construction available - ask for details
Comply to Smoking Regulations 2007
A modern and versatile shelter featuring a curved roof and drainage gutters on a firm and heavy gauge steel skeletal framework of bolted components
PVC roof and 16mm triple wall polycarbonate side panels
A Fork Lift and one member of staff will be needed to unload the panelled section and this unit must be bolted down on a prepared level concrete base
Please note: If the optional perch is ordered separately from the smoking shelter an additional carriage charge may apply. Please call for details.

Wall Mounted Smoking Shelter

£2,140.75 incl VAT

Aesthetically Pleasing Design
On site construction available - call for details
Complies to Smoking Regulations 2007
Box section construction which makes the unit exceptionally sturdy & durable
The roof is made up of 16mm thick Triple Wall Polycarbonate Sheet & front capping of 1mm Galvanised Sheet Steel
The unit comes with two upright supports & additional option of fill in end panels clad with 16mm Triple Wall Polycarbonate Sheeting
Powder Coated Green
The unit must be securely bolted to the wall and floor, Wall/Floor fixing bolts are not supplied with the unit
A forklift will be needed to unload these units

Wheeled Bin Shelter

£1,405.09 incl VAT

No fixing required - Simply secure this unit by using six 600 x 600m paving slabs (not supplied)
Fabricated from robust Heavy Duty Box Section
Complemented by Tri Wall fluted Plastic side panels & Galvanised sheet Steel roof
Can also be used as a Smoking Shelter
Fork Lift needed for offloading

Mesh Storage Cages

From £974.18 incl VAT

All units have a height of 2230mm
Available Ex-Stock - Ask about our Installation Service
Site Survey, CAD Design and Installation Service Available - please call for details

Galvanised Secure Stores

From £4,548.98 incl VAT

Side & roof panels are manufactured from 0.6mm cold rolled corrugated galvanised steel & for additional strength the unit has a structural frame which is fitted at each end & at the centre of the unit
The sump is manufactured from 2mm structural grade galvanised steel & is fitted with base plinths to keep the underside of the units out of contact with the ground
The double doors, fitted with 3 upper & 3 lower vents in each door, are located on one of the short sides of the unit & are secured with a Kale mortis lock with cylinder (152R)
Complete with two sets of shelves (60kg shelf U.D.L.) on each of the long sides of the unit
Fork lifting pockets are underneath the units

Dockplates

From £201.73 incl VAT

Used for loading and unloading vehicles from a raised loading area
Typically for use with pallet trucks, sack trucks, roll cages & pedestrian access
Standard features; manufactured from high tensile aluminium with built in anti-slip finish, loop type handles for movement & one pair of locking legs to prevent movement
Options; fork truck handles (FTH-1) for movement by fork truck (recommended for plates marked) & side curbs with castors (SCC-2) to aid movement

Industrial Buildings, Loading Bays & Shelters

Call for pricing

Ideal for Warehouses & Factories, Stadia & International Eventing, Military & Defence, Health & Education, Sports Halls & Arenas, Nuclear, Chemical & Petro-chem.
Manufactured to BS EN:1993
Lowest cost of ownership of any building type in its class
Fastest completion times
Flexible low cost designs
Corrosion resistant materials

Fast Action Doors

Call for pricing

Prices are from around £5000 to £8000 depending on size, operating systems & quantity
The equipment is wind braced
Door opening speeds are approximately 1m/sec
We will supply fixing frames where none exist
They are fast, safe & economical to own
They are made for busy applications
Technical support is available

Dudley Cycle Shelter

From £1,820.38 incl VAT

The Dudley Shelter combines contemporary design at a competitive price.
This Shelter is available with a perspex roof and optional end panels in a galvanised finish or a galvanised with a powder coated finish.
Leg frames can either be bolted to the floor or grouted into the ground
Designed for use with our Sheffield Loops
Initial shelters can be linked side by side to form longer runs
Adjustable feet for on-site positioning
Supplied with a 4mm PETG perspex roof
Powder coated finish versions also available in 5 colours - please call for details

Smoking Canopy

From £889.66 incl VAT

This shelter provides cover for up to 3 smokers
Translucent polycarbonate roof provides up to 97% UV protection
Simply bolts to a suitable wall (fixings not included)
Site survey and erection service
available - call for details